Mt Penn Water flushes its distribution (pipeline) system. This is an essential part of our system maintenance program, because it helps us to continue to provide you with high-quality water service.
To flush the system, we systematically open our fire hydrants to increase water flows – allowing us to “flush” any minerals and deposits from the pipes. While flushing the system won’t interrupt your water service, when crews are working in your area, you may notice a temporary drop in water pressure or discolored water. This is normal. If this happens, simply let your water run until it is clear.
CUSTOMER TIPS
- Avoid running your tap water and using the washing machine or dishwasher while crews are flushing in your area.
- If discolored water occurs, simply run the cold water for a few minutes until it is clear. This will allow the sediment to work its way through your pipes.
- Check for discolored water before using the washing machine or dishwasher. Wait until the water runs clear at the tap before doing laundry or running the dishwasher. NOTE: If your laundry becomes stained, DO NOT PUT YOUR LAUNDRY IN THE DRYER. Rewash clothes immediately using detergent and add a rust remover. Most rust removers can also be used on stained fixtures.
- In some cases, slight discoloration might linger for a few hours. This discoloration only affects the appearance of the water and does not affect water quality. No health hazards are associated with discolored water from hydrant flushing.
- If water pressure or water volume seems low after flushing has been completed, check your faucet screens for trapped particles.